Pressure Vessels Design and Fabrication TC-60 Hard Coating Valves & Fluid Flow technology Custom Machining

TC-60TM Hard Coated Shaft Sleeves and Other Coatings

ADM's TC-60TM protects your equipment against corrosion and erosion. Manufactured under controlled conditions it is precision ground, ultra smooth and extra hard, the TC-60TM is over 60 on the Rockwell 'C' scale.

TC-60TM Sleeves are all fused coated and offer great protection against wear and friction resulting in longer life and lower costs. Through the cooperation of our customers their records indicate that thousands of our TC-60TM sleeves have proven that they have reduced costs by half of their previous level. More production and less downtime.

TC-60TM is a unique process in that it is not a single hardfacing material but a blend of atomized powders specially formulated for each application. When fused to a sleeve, shaft, piston, etc... results in a superhard, extra smooth surface that works against corrosion, erosion and wear.

TC-60TM can be used in a variety of applications in rigorous conditions to extend the life of your equipment:
  • Pumps & Mixers Shaft Sleeves
  • Pumps & Mixers Shafts
  • Screws
  • Screw Housings
  • Pistons
  • Plastic Extrusion Dies
  • Impeller Rings
  • Exhaust Valves/ Seats
  • Exhaust Fans
  • Forging Tools
... And any where else there is an erosion and/or corrosive problem.

Complimenting the TC-60TM hard coatings process ADM Stainless Inc. offers a variety of other coatings applied under the same condition and the same process they include:
  • Tungsten Carbides
  • Ceramics
  • High Cobalt Alloys
TC 31

Is a tungsten carbide fused coating which is specially blended with Nickel-Chrome self-fluxing alloy. finished to 16 RMS measuring a matrix of 60 Rc and a carbide hardness of 72 Rc. Applications include:
  • pump seals
  • exhaust valves/ fans
  • shafts
  • wear rings
  • plastic extrusion dies
  • sleeves
  • cover rings
  • hydroelectric valves

Is a high cobalt self-fluxing alloy. Finish to 16 RMS or lapped to 2 RMS optional with a hardness of 50 Rc. TC-HC has a low coefficient of friction, extending the life of packing. Applications include:
  • shafts/ sleeves
  • exhaust valves/ fans
  • impellers
  • exhaust seats
  • fuel rod mandrels
  • acidic environment

Is a HI VELOCITY OXY-FUEL (HVOF) process that uses high velocity gas-fueled coating system which uses high kinetic energy and controlled BTU output to produce dense, very low porosity coatings with high bond strength and extremely high quality coatings. Type of Coatings include:
  • Austentic Stainless Steel
  • Nickel/ Chromium Molybdenum
  • Copper
  • Tungsten Carbide/ Cobalt
  • Duplex Tungsten Carbide/ Nickel
  • Cobalt Base Superalloy
  • Chromium Carbide/ Nickel Chromium

Is a PLASMA THERMO SPRAY process like HVOF and other thermal spray processes plasma uses crushed atomized metal powder as a feed stock. Itís ability to produce high energy to melt most metals makes plasma a very good choice for the application of ceramic coatings among many other coatings applications.Applications include:
    Shaft Sleeves
  • Printing Rolls
  • Pistons
  • Valves
  • Pump Shafts
  • Many more...

Is a WIRE METALLIZING process developed, perfected and utilized for the restoration of existing worn and new parts subjected to corrosion, erosion and abrasive wear for ferrous and nonferrous metals. ADM has the facilities to prepare, metallize and finish machine any piece of equipment or component to original specifications. Applications: a wide range of metals can be metallized. Metallizing is most commonly used for building up worn parts or salvaging mis-machined parts, resulting in lower replacement costs.

TC-60TM Flyer

TC-60TM Hard Coated Shaft Sleeves & Other Coatings

© Copyright 2008 ADM Stainless Inc, All rights reserved. Questions or comments? Contact Us